News

This temperature-controlled rotary table for material testing and aerospace applications combines wide-range thermal cycling with arc-second level positioning accuracy for evaluating material properties under thermal stress. Designed for thermal expansion measurement, mechanical strength testing, and component validation, the rotary table addresses industry demand for reliable platforms capable of simultaneous thermal and motion characterization.

This dual-axis rate turntable delivers ±5″ positioning accuracy with ±2″ repeatability and 0.36″ resolution. Featuring a 580 mm stainless steel table, 40 kg load capacity, main axis rates up to 500°/s, dual-axis swing capability, and 360° continuous rotation, it provides reliable inertial sensor calibration and dynamic simulation for gyroscopes, accelerometers, and IMU devices.

This dual-axis rate position turntable delivers ±5″ positioning accuracy with ±2″ repeatability and 0.36″ resolution. Featuring a Φ580 mm table, 40 kg load capacity, spindle rates up to 500°/s, dual-axis swing capability up to 10 Hz, and 360° continuous rotation, it provides reliable inertial navigation testing for aerospace, optical, and equipment validation applications.

This two-axis positioning table holds ≤±10″ accuracy with ≤3″ repeatability, sweeping both axes from 0.001°/s to 20°/s at 0.0001°/s increments. A φ400 mm platen supports ≥20 kg loads within a compact 107 kg enclosure—delivering closed-loop control for optical research, robotics, and astronomical instrumentation.

This U-T type dual-axis turntable holds repeated positioning to ±5″ with rate resolution below 0.001°/s and a minimum stable rate under 0.005°/s. A Φ400 mm load plate supports 40 kg payloads, featuring zero-position locking pins and mechanical stops—delivering reliable optical measurement, aerospace calibration, and robotics validation across pitch (-60° to +60°) and azimuth (0° to ±170°) ranges.

This three-axis rate table pairs servo motor precision with closed-loop control to deliver ±5″ positioning accuracy and ±3″ repeatability. Featuring a Φ360 mm stainless steel table, 20 kg load capacity, inner rates up to 500°/s, and 360° continuous rotation, it provides reliable IMU and INS testing for aerospace, satellite, and precision manufacturing environments.

This three-axis rotary test fixture delivers ±5″ positioning accuracy with ±3″ repeatability and 360° continuous rotation. Featuring a Φ360 mm stainless steel table, 20 kg load capacity, inner rates up to 500°/s, and a 30-channel slip ring, it provides reliable in-process testing for MEMS sensors, inertial components, and precision instruments.

This three-axis optical inertial test table delivers ±10″ positioning accuracy with ±5″ repeatability and an extraordinary 10,000°/s inner-axis rate. Featuring a Φ320 mm super-hard aluminum table, 10 kg load capacity, 10,000°/s² acceleration, and 360° continuous inner rotation, it provides high-dynamic motion simulation for inertial navigation, optical sensor validation, and precision calibration applications.